Optimización del proceso de manufactura del ensamble de un troquel a través de su administración
DOI:
https://doi.org/10.63728/riisds.v6i1.220Keywords:
Manufacturing process, assemble, die, toolsAbstract
The document describes the management of the manufacture of the assembly of a die from its design and establishment of the production processes and their sequence, with the use of tools from the manufacturing support systems; to meet the satisfactory delivery of the finished product to the customer in a timely manner, and thereby optimize these processes and consequently increase the productivity of the organization. It is very important to carry out this work, since there have been some problems, such as: delivery of the product in a period of time after the established one, tools of support systems are not used in the manufacture of a die, lack of information system, as well as errors and loss of material during the production process. The detailed application of Manufacturing Engineering, Production Planning and Control, Quality Control and Measurement and Inspection is shown, designing and preparing documents, diagrams and other tools that are necessary to carry out the production process of the die 294 that has been requested. As a result of the development of this work, die 294 was delivered 5 days in advance, all the components of the assembly were manufactured with the required specifications, there were no material losses and the manufacturing process of a die was standardized.
References
Arredondo, G., Ocampo, K.V., Orejuela, J.P., Rojas, C.A. (2016). Modelo de planeación y control de la producción a mediano plazo para una industria textil en un ambiente make to order. Revista Ingenierías Universidad de Medellín, 16(30), 169-193.
Campos, A., Escamilla, A., Alfonso V.A. (2014). Proceso de diseño de un troquel progresivo para grapa que regula la longitud de recorrido de corriente eléctrica en una resistencia. Twelfth LACCEI. Recuperado dehttp://www.laccei.org/LACCEI2014-Guayaquil/RefereedPapers/RP020.pdf
Díaz, L.L., Rodríguez, Y., Méndez, R.F., Hernández, L. (2019). Uso de programas de diseño asistido por computadoras en el diseño de troquel para obtener la pieza enganche del sistema andamios. Revista Avances, 21(2), 238-247.
Gámez J., Sánchez, A., Satorres, S., Gómez, J. (2012). Ensamblaje automático de piezas con desviaciones dimensionales. Revista Iberoamericana de Automática e Informática industrial, (9), 383-392.
Groover, M. (2007). Fundamentos de manufactura moderna (3a ed.). México, DF: McGraw-Hill Interamericana.
Jaramillo, O., Tejeda, A., Clavijo, A. (2013). Caracterización de la planeación y el control de la producción en las MIPIMES del sector manufacturero en la Ciudad Neiva. Revista ENTORNOS, 26(2), 201-212.
Madrigal, M., Mandy, R. (2018). Formalización del conocimiento para el diseño de troqueles de corte progresivos. UCLV. Recuperado de https://dspace.uclv.edu.cu/bitstream/handle/123456789/10260/Madrigal%20Marrero2C%20Robert%20Mandy.pdf?sequence=1&isAllowed=y.
Maturano, B.A., Sarabia, E. y Rivera, K. (2017). Revista de Ingeniería y Tecnología para el Desarrollo Sustentable, 3(2017), 54-62.
Medina, J.E. (2010). Modelo integral de productividad, aspectos importantes para su implementación. Revista EAN, (69), 110-119.
Rojas, O., Rojas, L. (2006). Diseño asistido por computador. Revista Diseño y Tecnología, 9(1), 7-15.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Revista Interdisciplinaria de Ingeniería Sustentable y Desarrollo Social
This work is licensed under a Creative Commons Attribution 4.0 International License.
